How to Make a Ribbon Watchband

Do you need a fun sleepover idea? Plan a ribbon watchband craft for your preteen girl's slumber party. This simple project will entertain them for hours as they explore their inner fashionista. After the party is over they will have a special fashion accessory to take home. Pick up several watches at the dollar store to make this ribbon watch band an economical craft. Add a basket of ribbon and charms for your teenage designers to create one-of-a-kind treasures.

Instructions

1

Cut the existing watch band from the watch. Do not remove the pin that connects the watch band to the watch if it is removable.

2

Measure wrists using the measuring tape. It will work better if you measure each other's wrists. Add 2 1/2 inches to the measurement. Cut a piece of ribbon using your customized measurement.

3

Thread the ribbon down between the watch and the watch pin, on one side of the watch, under the watch and up between the watch and the watch pin on the other side.

4

Turn the ends of the ribbon under a 1/2-inch to give the watch band finished ends that will not fray. Glue the ends using the craft glue. Allow the ends to dry.

5

Place the ribbon watch band around your wrist and overlap the ends. Mark the overlap placement with straight pins. Do not pin the ends together. Again, enlist the help of a partner for this step. Take the watch off your wrist.

6

Glue a 3/4-inch piece of Velcro to the wrong side at one end of the ribbon watchband. Glue the other half of the Velcro to the right side of the other end of the watchband. Allow the glue to dry.

7

Lay the watchband out on a flat surface. Arrange the charms, beads, acrylic jewels or whatever decorative trims you have gathered, on the right side of the ribbon watch band. Glue the decorations in place. Allow the glue to dry.